Brand: FurryCircuits.com
Product Code: FAN
Availability: 55.0
$20.00

Available Options

Recommended faux fur care:

Hand wash or machine wash with cool water only. Allow to air dry or use no-heat tumble dry if using a dryer. Excessive heat will ruin and melt the fur!

How to remove creases:

1. Lay the fur piece out on a flat surface. 

2. Using a hairdryer on medium heat, blow the fur fibers in the direction of the pile. You may want to use a slicker brush to help straighten the fibers. 

3. After a few seconds of heat, the fibers should mostly straighten back out. Repeat over the rest of the piece and it should be mostly fixed. WARNING: Don't hold the hairdryer for too long in one spot - this will cause the fibers to MELT which will permanently ruin the fur.

**Please note: this item is made to order and has a lead time of 1-2 weeks.**

Getting overheated in your suit? A fursuit fan can make it much easier to suit for a long time! These are installed inside the head (usually in the muzzle) to either blow cool air into the suit or to blow hot air away. 

**Please note: at this time we are out of stock USB battery packs. However, the fans should work with pretty much any USB power bank.** Our fursuit fans run off of rechargeable 2600mAh batteries, which will power the fan for most of a day! You won't have to worry about buying expensive replacement batteries for your fan, and you can charge the battery using a micro USB cable (included) and USB power brick or computer (not included). These battery packs can even be used to charge your phone* if you want! Battery packs are available in 8 colors. 

Want to be able to turn your fan off and on using a switch? Toggle switches (flip switch style or push button style) available for just $5!

Worried that you'll need extra battery life? We offer the option for an extra battery pack if you would like one at a 20% discount from how much they will cost separately.

We strongly recommend using the largest fan your suit can accommodate, as this will provide the best air flow.

30mm fan dimensions:

1.18x1.18x3/8"

50mm fan dimensions:

1.96x1.96x1/2"

70mm fan dimensions:

2.75x2.75x2/3"

*IMPORTANT NOTE: These batteries may not work with OnePlus products.*

Write a review

Please login or register to review