Recommended faux fur care:
Hand wash or machine wash with cool water only. Allow to air dry or use no-heat tumble dry if using a dryer. Excessive heat will ruin and melt the fur!
How to remove creases:
1. Lay the fur piece out on a flat surface.
2. Using a hairdryer on medium heat, blow the fur fibers in the direction of the pile. You may want to use a slicker brush to help straighten the fibers.
3. After a few seconds of heat, the fibers should mostly straighten back out. Repeat over the rest of the piece and it should be mostly fixed. WARNING: Don't hold the hairdryer for too long in one spot - this will cause the fibers to MELT which will permanently ruin the fur.
**Please note: this fur is LIMITED AVAILABILITY, meaning that once we sell out, we may not be able to get more. Please plan accordingly and order as much as you may need!**
This fur is similar to bunny shag, but not quite - it's a little more coarse. We found this fur to be a bit thinner and shorter,, but still totally pretty and usable for a fursuit.
This fur has approximately a 3/4-1" pile, and comes in 1 or 1/2 yard increments. Yards average 60" in width. This fur can be used on any part of a fursuit, but is rather long so will need to be shaved down using pet clippers on shorter fur areas, such as the face of a fursuit.